Stair Saw
This saw
is in very nice condition I am not sure if the wear strips are new or made
to be replaced over time. Nice.
PK-STAIR
Fine. . . . . $40.00
Ulmia Stair Saw The
owner took care of his tools. The blade is straight, sharp and ready to go
back to work.
DP-ULMIASAW
Good +. . . . . $40.00
Disston
Flex Back Backsaw I have never
seen or had
this configuration before. DifferentClick for Pic Click for Pic Click for Pic Click for Pic Click for Pic Click for Pic
CYN-SAW-5
Good . . . . . $50.00 SOLD!
Germanic
19th Century Hack Saw Nice form!
Note the file work, and the attention to detail. Nice
CYN-GHS-1
Good + . . . . . $75.00
Challenge
Jigsaw
This
Challenge Jigsaw by Seneca Falls Mfg. Co of NY has been
partially restored. It looks pretty good and seems to be operable but not
all is correct or original. I believe the
table has been recast / replaced. It has casting ribs on the bottom and a
lip at the edge and so might be right and just buffed up for the restoration.
One of the foot peddles has a break in it, and the entire bracket affair to hold
it in place looks to be made up. The rest of this saw looks great and it is
a very graphic and showy piece with its flared leg design and paint decoration.
There is patent info up near the top, and a lot of original paint and decoration
remain there.click for pic click for pic click for pic click for pic click for pic click for pic
CYN-SAWPP-1
Challenge Jigsaw . . . . . . . $395.00
Order Now
Seneca
Falls "Victor" Scroll Saw w/ Drill Attachment
The Victor treadle / pedal saw with drill
attachment is the largest size pedal saw that the Seneca Falls Mfg Co of NY
produced. The Seneca Falls Mfg Co were the main competitor of Barnes in this line of
pedal powered machinery and as well known for the quality line of saws they
produced. Seneca Falls also produced the Rival,
Empire, Fleetwood and Challenge line of pedal saws. All of these were smaller and
less expensive than the Victor model.
This saw looks OK.
It has been in stored in a barn for at least the last 20 years and has a
coating of dust on it. I looked it over as best I could in the area it
is now in and did not see any breaks or major damage. It turns over
easily, and the saw spring arrangement on top is operable. The pedals and
connecting rods look to be original and OK. The drilling attachment is
present as are the guide wheels for it.
Click for Pic Click for Pic Click for Pic Click for Pic Click for Pic Click for Pic
Good . . . . . $1495.00
CYN-SFV-1
1876
Patent Shipman Scrollsaw /
Jigsaw
This is a neat looking pedal powered jigsaw I have never seen before, and would
not expect to see in such nice condition. It has an almost shaker look and
feel to it being made almost entirely of wood, and having such graceful lines.
Mr. Shipman pulled the
patent #
183,029 in
1876, and resided in Rochester NY, and if I am not mistaken there was a
Shaker colony up that way back when. This was bought here on the west
coast near Reading Ca. years ago. The condition is such that I doubt
it was ever used. It has been sitting on display for the last 20-30
years, and is now being offered for sale for the first time in that time.
A super piece!!
click
for pic
click for pic
click for pic
click for pic
click
for pic
click
for pic
click
for pic
The price shown includes packing & shipping
SH-JIG-1
1876 Patent Jigsaw . . . . . . . $595.00
Order
Now
German
Cast Iron Mitre Box
The wooden saw and the tensioner are missing. The cast iron
base is nice and this saw could be restored and would represent a very early
and unusual form of Mitre box for the collection. Make sure you look at the
cast info on the back side with German names and patent info. It is very graphic.
Nice and different.
click for pic click for pic click for pic click for pic
CYN-GMSAW
Good . . . . . . $50.00
2 Salesman Sample Buck Saws
The top one is all right and correct. The
bottom one has been rebuilt using newer or different parts, but started out life
the same I believe.
Top . . . . .Good + . . . . . .$95.00
Bottom . . . . .Good - . . . . . .$35.00
CYN-SS-SAW
Turning /
Bow Saw I do not see a maker name.
It is all OK and ready to go..
Good . . . . . . $55.00
DP-TSAW-1
Marples
12" Turning /
Bow Saw
It is all OK and ready to go..
Fine . . . . . . $65.00
AMN-MTSAW
Bow Saw
/ Buck Saw Hang it for decoration, or
buck up and go get some firewood.
Nice
CYN-BOWSAW
Good . . . . . $20.00
Metal Framed Turning /
Bow Saw / Buck Saw I have never seen this
before. The uprights are made of tubular steel. It is European. Nice
& Different Click for Pic Click for Pic Click for Pic
PK-BOW-1
Good . . . . . $45.00
Patented
Folding Hack Saw I have
never seen this before. The LA location and patent info are on the
handle. It even has storage space in the handle for blades.
Be sure to look at the other pics to see it all folded up. NeatClick for Pic Click for Pic Click for Pic
AMN-FSAW
Good . . . . . $25.00
5'
Sheffield Saw Works 2 Man Cross Cut Saw
This does not look to have seen much of any use. The etch is there
but weak. It mentions the Sheffield Saw Works in Indianapolis.
I have read that is an Atkins product. It wants to be put back to work. Click for Pic Click for Pic Click for Pic
SBRG-2MAN
Good + . . . . . $75.00
3
different 2 Man Cross Cut Saws
The largest one is an 8' saw. It is NOS. I cleaned the light
rust that was on these. I used a nylon brush on a power sander. All
three saws came from a closed hardware store and just had storage rust
issues. I think you can see in the pics that they have not been
sharpened or used much if at all. You can just make out etches on 2 of
them. The 8' one says Precision Ground. Also included is
the pair of Disston handles which are also new / NOS..
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
Click for Pic
SBRG-32MAN
Good + . . . . . $350.00 / lot
Disston Nest of Saws w/ Pouch
What you see is all there is. Got a handle?. Click for Pic Click for Pic Click for Pic
SBRG-DIS-N
Good . . . . . $25.00
Stanley
#100MM Mitre / Miter Machine w Rule / Saw & Accessories
This machine looks to be about NOS and so does the rare original rule.
The original box is cardboard over plywood. and a bit rougher The saw has a few storage
spots of rust. Complete with parts I have never seen before.
It is close to mint!! Click for Pic Click for Pic Click for Pic
CYN-100MM
Fine . . . . . $295.00
We can help you sell your quality Antiques in this and other categories of Antiques.
If you have similar antiques or collectibles you want to sell please see our
FAQ Page, the
Appraisal / Selling Page, and the
Selling
Your Collection Pages for further info about
selling with us.
To view examples of the types of antiques and collectibles we have previously
sold and are always interested in helping you sell please visit our
Past
Sales Archive Pages at our sister website
www.AntiqBuyer.com.
This website is Copyrighted
(1998 - 2012)
Larry & Carole Meeker