Antiques
Of A
Mechanical Nature
 
Larry and Carole Meeker
Purveyors of American Patented & Mechanical Antiques

           

     www.patented-antiques.com
    
            LCM@patented-antiques.com


          
530-620-7019 phone

 

 

Antique / Collectible & User Quality

Low Angle

Stanley Block Planes

 

The Stanley Block Planes listed on this page are all from the 60 series of block planes meaning they are low angle models. 

All of the Stanley block planes listed on this page are variations of, similar to, or evolved from the basic Stanley # 9 1/2 design block plane. The #9 1/2 block plane went through a series of changes in its design over its 100 year span of production.   The differences between the planes listed here are as subtle as finish differences, such as  polished fitting, nickel plated or japanned finish, cap style, an extra 1" in length as with the 18 & 19, or with the 60 series of low angle block planes where the cutter is set at a lower angle than the high angle 9 1/2 family of planes were.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:  The throats on all of the below planes are good unless otherwise noted.  Many sellers of block planes never address and buyers are never told of the condition of this critical aspect. Nicks in the throat, or stress cracks at the edges.  These planes are prone to damage in these areas and it needs to be considered.

 

 

2 Stanley #65 Series Low Angle Block Planes 

The main differences here are the style of the caps.  The knuckle joint is a war issue that was never nickel plated and is proper.  Both are nice.     Pic 

 CYN-65S

Top .... Good+ ...... $45.00     

Bottom .... Good+......$45.00

      
Order Now  

 

Stanley #65 Low Angle Block Plane 

The knuckle joint is a war issue that was never nickel plated and is proper.  Pic      Pic

 CYN-65S2

Good+ ...... $45.00     

      
Order Now

 

 

Stanley # 60 1/2 Low Angle Block Plane  This one is as nice as one could ask for.    Pic      Pic 

CYN-lowblk-3-5 

Good+......$38.00     SOLD

Order Now

 

 

 

3 Stanley #60 Series Low Angle Block Planes  These are all variations of the 60 series Stanley Low Angle Block Planes.  On the left is a nickel plated version, in the center is a 61 that does not have a adjustable front and is a hard plane to find, and on the right is a pretty standard 60 1/2.    Pic       

CYN-lowblk-3-5 

Left  ..... Good+......$25.00  SOLD

 Middle   ..... Good+.......$75.00

Right  ..... Good+ .......$35.00     SOLD

      
Order Now  

 

We want to help you sell your quality Antiques in this Category. 

If you have a collection of similar antiques and want further info please see our FAQ page, the Appraisal / Selling Page and the Selling Your Collection Pages for further info.

 

BACK