Meeker's
Mechanical
Nature Antiques
Larry and Carole
Meeker

Purveyors of Americana
Patented & Mechanical Antiques
www.Patented-Antiques.com

patentedantiques@gmail.com
Orders / Inquiries / Questions

530-748-7297
(ORDERS ONLY)


Antique & Collectible
Stanley Tools

Spoke Shaves / Chisels / Cutters / Misc.  / Parts & More



Stanley # 850 Roll-Up Tool CabinetStanley # 850 Roll-Up Tool Cabinet  The collector spent a lot of time filling this tool box up with proper era Stanley Tools.  Most are Stanley, and most date from the correct pre WWII era.  A few are a bit later.  Most are in pretty good condition. 

Click for Pic                Click for Pic                Click for Pic               


Click for Pic                Click for Pic                Click for Pic                Click for Pic

RNO-BOX

Good +. . . . .  $450.00 w/ Pictured Tools

To Order Email:  patentedantiques@gmail.com





Stanley No. 38 & 338 Cast Iron Level StandsStanley No. 38 & 338 Cast Iron Level Stands  Here are 3 Stanley Leveling Stands.  These tools were designed to turn a level into a rough leveling instrument for layouts and the like.  The Stanley 38 level stand was designed to fit Stanley's line of metal levels.  The 38 is the cast iron level stand with the 12 inch level in it and the level is included.

Stanley # 48 level stands were for wooden levels.

The Stanley # 338 Level Stand can be used with either wood or metal levels.  It has thumbscrews to tighten against both sides of either a wood or metal level.  One of the # 338 stands offered has the lower base that has fittings for legs or a staff, and one does not.

Click for Pic                 Click for Pic                 Click for Pic                 Click for Pic                


Click for Pic                 Click for Pic                 Click for Pic                 Click for Pic

TX-S38-LVST              TX-S338-LVST-NB              TX-S338-LVST

38 w/ Level . . . . . . . Good  . . . . . $60.00     SOLD!!

338 NB . . . . .  Good  . . . . . $25.00

338 . . . . . .  Good  . . . . . $45.00      SOLD!!

To Order Email:  patentedantiques@gmail.com





Stanley Hurwood Screwdrivers9 Stanley & Hurwood Screwdrivers   The bigger ones on top are $10.00 each,  the smaller ones in front are s3 for $10.00.  All have good tips. 

Click for Pic                Click for Pic

TX-SSCREW-1

Good +. . . . .  $40.00 / Lot

To Order Email:  patentedantiques@gmail.com






Stanley Hurwood Screwdrive10 Stanley & Hurwood Screwdrivers   All have good tips. 

Click for Pic                Click for Pic

TX-SSCREW-2

Good +. . . . .  $40.00 / Lot

To Order Email:  patentedantiques@gmail.com






Stanley Brass Trammel Points w/ Pencil HolderStanley Brass Trammel Points w/ Pencil Holder   Dirty but Nice.  Original and proper keepers.  Screw in pencil holder.   Will clean to be fine.

Click for Pic                Click for Pic                Click for Pic

TX-STRAM

Good + . . . . . $45.00

To Order Email:  patentedantiques@gmail.com





Stanley # 138 Level SightsStanley # 138 Level Sights in Box   5 sets.  Most have Sweetheart era stamps. Most appear to be unused.  The # 138 fit the Stanley line of wooden levels.  Used to aid in layout, grading, and other building projects.

Click for Pic           Click for Pic

TX-138-LS

Fine  . . . . . $32.50 / Choice

To Order Email:  patentedantiques@gmail.com





Stanley Level Sights in BoxStanley # 1 & # 2 Level Sights in Box  The # 1 & # 2 Stanley Level Sights are made of cast iron while the # 138 sights are stamped brass.   The # 2 on the right fit the Stanley line of wooden levels.  The # 1 on the left fit metal levels with a 1" top rail.   Used to aid in layout, grading, and other building projects.

Click for Pic           Click for Pic           Click for Pic

TX-LVLS-1                 TX-LVLS-2

Fine  . . . . . $25.00 / Choice

To Order Email:  patentedantiques@gmail.com





Cast Iron Level SightsCast Iron Level Sights Look like Stanley # 2 Level Sights for wooden levels but I see no marks even on the screws. 

Click for Pic

TX-LVLS-NB

Fine  . . . . . $10.00

To Order Email:  patentedantiques@gmail.com





Starrett # 131 Cast Iron Level Sights in BoxStarrett # 131 Cast Iron Level Sights in Box  Look like Stanley # 1 Level Sights for metal levels.  Marked Starrett on back.  You do not see these often.

Click for Pic

TX-LVLS-STAR131

Fine  . . . . . $60.00

To Order Email:  patentedantiques@gmail.com





Hot Dog Handle for Stanley # 9 Cabinet Makers PlaneHot Dog Handle for Stanley # 9 Cabinet Makers Plane   Original, not aftermarket.  Nice with one spot of rust.  Oftentimes missing. 

Click for Pic           Click for Pic

MOA-HOTDOG

Good +. . . . . $275.00

To Order Email:  patentedantiques@gmail.com






Stanley 42 X Saw Set in BoxStanley 42 X Saw Set in Box   Nice.  Marked 42 X on the inside of the handle.  Includes the accessory for circular blades and an original instruction pamphlet. Carefully checked out and all is good.

Click for Pic                Click for Pic                Click for Pic

RNO-42X

Fine  . . . . . $85.00

To Order Email:  patentedantiques@gmail.com





Stanley 42 Saw Set in BoxStanley 42 Saw Set in Box   Nice.  Marked 42 on the inside of the handle. Box has seen better days.  Includes an original instruction sheet. Carefully checked out and all is good.

Click for Pic           Click for Pic           Click for Pic           Click for Pic

TX-42

Fine  . . . . . $75.00

To Order Email:  patentedantiques@gmail.com





Stanley 42 SS / W Saw Set in BoxStanley 42 SS / W Saw Set in Box   Nice. Box marked 42 SS.  Marked 42 W on the inside of the handle. Box has seen better days.  Includes an original instruction sheet.

Click for Pic           Click for Pic           Click for Pic           Click for Pic

TX-42-SS

Fine  . . . . . $50.00

To Order Email:  patentedantiques@gmail.com





Antique Spoke SaveOdd Spoke Shave   I could not find this shave in the book.   It might be there, but  - - - - -     I see no maker marks.  It is an interesting design with the tabs and heavy cast blade holder.  The condition is nice, noting the collectors trademark coat of lacquer.

click for Pic            click for Pic            click for Pic

CYN-SPS-1

Good +  . . . . . $50.00

To Order Email:  patentedantiques@gmail.com






Stanley 85 Boxwood Spoke ShaveStanley 85 Boxwood Spoke Shave  One tab is broken but there is plenty to grab and it will be a good user.  Nice.

Click for Pic

AMN-S85

Good  . . . . . $45.00 

To Order Email:  patentedantiques@gmail.com






Stanley 85 Boxwood Spoke ShaveStanley 84 Boxwood Spoke Shave  Cutter full width w/ one short tab  

Click for Pic                     Click for Pic

RNO-S84

Good  . . . . . $45.00 

To Order Email:  patentedantiques@gmail.com








Bailey Patent Box ShaveBailey Patent Box Scraper  This style box scraper was patented by Joseph Bailey and assigned to Seldon Bailey who owned the Bailey Tool Co. of Woonsocket  Rhode Island.  The patent was granted on July 26 1870.  These can be found in several sizes and I believe this one at approx. 8" is the smallest and hardest to find. A rare piece.  Nice enough for the collection.

click for Pic                 click for Pic

CCC-BTC-SC

Good + . . . . . $75.00 

To Order Email:  patentedantiques@gmail.com





Stanley 96 Blind Nail Chisel GaugeStanley 96 Blind Nail Chisel Gauge   With Composition handle 1/4" Stanley # 40 chisel.   Nice!!

Click for Pic                Click for Pic

CYN-S96-CG

Fine . . . . . $125.00 

To Order Email:  patentedantiques@gmail.com






Stanley Millers Patent Iron Wrap Around Fence & 2 Piece Fence ScrewsStanley Millers Patent Iron Wrap Around Fence & 2 Piece Fence Screws  The 41 fence and screws are being offered separately.  The iron wrap around fillister fence will fit on a number of different type 41 Millers Patent Planes.  The 2 two piece screws were not offered past 1874 or 1875 and are found only on Type 1 thru 3 Miller Patent planes.  These are original, very hard to find, and very nice. 

Click for Pic                Click for Pic                Click for Pic

GG-41-XX                 GG-MP-SC

Fence. . . . . Good +  . . . . . $295.00

2 Screws . . . . . Fine . . . . . $125.00 Each

To Order Email:  patentedantiques@gmail.com




Stanley Aluminum Replacement Plane HandleStanley Aluminum Replacement Plane Handle   Larger model that will fit # 5 thru 8 size planes.  No more breaking nice rosewood ones  No damage and Nice!!

Click for Pic

Good + . . . . . $25.00

RNO-S101

To Order Email:  patentedantiques@gmail.com






Stanley Hollow & Round CuttersStanley Hollow & Round Cutters  2 Pairs  44 / 54 & 47 / 57  

CCC-HR-CUT

Good + . . . . . .  $30.00 / Pair  Check for Availability

To Order Email:  patentedantiques@gmail.com







Stanley 720 ChiselStanley 1/2" D Chisel   This is a # 720 made for one of their tool box kits and marked D.  Nice!!

click for Pic           click for Pic           click for Pic

AMN-SCHIS-D

Good +. . . . . $20.00

To Order Email:  patentedantiques@gmail.com




Stanley Clamp-on Bench ViseSmall Red Stanley Clamp-on Bench Vise w/ Anvil  These can come in handy for holding small pieces.  It appears one owner user was drilling a hole or using a round file one day from the groove we see in the top.

click for Pic

AMN-REDVICE

Good  . . . . . .  $10.00

To Order Email:  patentedantiques@gmail.com






Stanley # 340 95 Watt Electric Soldering IronStanley # 340 95 Watt Electric Soldering Iron  Looks like it spent it life in a drawer.  The box took the wear, there is none to the tool.

Click for Pic                     Click for Pic                     Click for Pic

RNO-SOLDER

Good  . . . . . .  $15.00

To Order Email:  patentedantiques@gmail.com






Stanley # 2 Smooth Plane CuttersStanley # 2 Smooth Plane Cutters     Sweetheart era.  Nice! 

Click for Pic

MNA-2SH-CUT  

Good . . . . . $40.00 Each             #2 From Left SOLD

To Order Email:  patentedantiques@gmail.com




Stanley # 2 Smooth Plane CuttersStanley # 2 Smooth Plane Cutters    Later.  Nice! 

Click for Pic

MNA-2L-CUT

Good . . . . . $40.00 Each

To Order Email:  patentedantiques@gmail.com




Stanley Hollow & Round CuttersStanley Hollow & Round Cutters   These fit the auxiliary bottoms to create hollows & rounds with 45s or 55s.  Sold individually.  Nice! 

AMN-SHR-CUT

Good + . . . . . $15.00 / ea.       Most sold

To Order Email:  patentedantiques@gmail.com




Stanley 1 3/8 Block Plane CuttersStanley 1 3/8 Block Plane Cutters   NOS.  Sold individually.  Nice! 

AMN-138-CUT

Good + . . . . . $15.00 / ea.

To Order Email:  patentedantiques@gmail.com




Stanley NOS #90 / 92 / 93 CuttersStanley NOS #90 / 92 / 93 Cutters   These NOS cutters have the notched rectangle logo and date from WWII or after.  They are US made.  They will fit all the different size #90 series rabbit / Bullnose planes except for the #94.   Tough to find anymore, and Nice! 

AMN-909293-CUT

Good + . . . . . $25.00 / ea.

To Order Email:  patentedantiques@gmail.com




Stanley  # 98 / 99 / 79 CuttersStanley  # 98 / 99 / 79 Cutters   These are NOS cutters.  Nice! 

Click for Pic

AMN-9899-CUT

Good + . . . . . $15.00 / ea.

To Order Email:  patentedantiques@gmail.com





16 Cutters for Stanley 50 Combination Light Duty Plow Plane  These are in decent condition.  Some mix-matched.  What you see is what you get. 

CHC-50-CUT -2 

Good  . . . . . $75.00 

To Order Email:  patentedantiques@gmail.com





Sargent Block Plane Cutters4 Sargent Block Plane Cutters  A mix of hard to find Sargent block plane cutters.   Nice and tough to find. 

Click for Pic                    Click for Pic

AMN-4SBP-CUT

Good + . . . . . $25.00 / Lot

To Order Email:  patentedantiques@gmail.com






12 Drill Bits for Millers Falls or Goodell Pratt Drivers / Drills W Fluted Ends12 Drill Bits for Millers Falls or Goodell Pratt Drivers / Drills W Fluted Ends   What you see in the pics is what you get.  Some repeats.  Sold as a lot.   Nice!!

Click for Pic                Click for Pic

SBRG-YANKBOX

MF-GP Bits . . . . . $25.00 / Lot

To Order Email:  patentedantiques@gmail.com




14 Drill Bits for Millers Falls or Goodell Pratt Drivers / Drills w/ Round Ends14 Drill Bits for Millers Falls or Goodell Pratt Drivers / Drills w/ Round Ends   These will fit into anything with a chuck that tightens.  I think they changed to the fluted style after somebody pointed out they slipped.  What you see in the pics is what you get.  Some repeats.  Sold as a lot.   Nice!!

Click for Pic                Click for Pic

SBRG-YANKBOX

MF-GP Bits . . . . . $30.00 / Lot

To Order Email:  patentedantiques@gmail.com







Stanley # 2 Smooth Plane Lever CapsStanley # 2 Smooth Plane Lever Caps  An assortment from nice and original, to poorly done remakes.  From the left.

Click for Pic                    Click for Pic

AMN-2CAPS

Fine. . . . . $60.00

Good +. . . . . $50.00

Pitted . . . . . $20.00

Fake. . . . . $15.00

Cobbled. . . . . $20.00     SOLD!!

Ground 3 . . . . . $20.00

Fake. . . . . $15.00

To Order Email:  patentedantiques@gmail.com




Stanley Bed Rock 604 / 605 Lever CapsStanley Bed Rock 604 / 605 2" Lever Caps  An assortment.  From the left.

Click for Pic

AMN-604-CAPS

Good . . . . . $35.00

Good . . . . . $35.00

Good . . . . . $45.00

Good . . . . . $30.00

To Order Email:  patentedantiques@gmail.com





Stanley Bed Rock 604 1/2 / 606 / 607 2 3/8 Lever CapsStanley Bed Rock 604 1/2 - 605 1/2 - 606 - 607 - 2 3/8" Lever Caps  An assortment.  From the left.

AMN-604H-7-CAPS

Needs Lever . . . . . $15.00     SOLD!!

Good . . . . . $45.00

Good . . . . . $45.00

Good . . . . . $45.00

To Order Email:  patentedantiques@gmail.com


We can help you sell your quality Antiques in this and other categories of Antiques.

If you have similar antique or collectible tools you want to sell please see our
FAQ Page, the Appraisal / Selling Page, and the Selling Your Collection Pages for further info about selling with us.

To view examples of the types of antiques and collectibles we have previously sold and are always interested in helping you sell please visit our Past Sales Archive Pages at our sister website www.AntiqBuyer.com.


BACK to Antique Tools



This website is Copyrighted
Larry & Carole Meeker